FAQ – Frequently asked questions: Roof system KJG

In our offer you will find a wide selection of roof coverings that are adapted to different types of buildings and customer preferences. In the section Products/Roofing you can find all types of roof covering.

The material versions of our roof coverings differ according to the type of covering. You can find a complete overview of available materials and variants in the section Products under the category Roof coverings.

We will be happy to advise you in choosing the optimal material for your project.

The covering widths of roof covering sheets are as follows:

Metal roofing UNI 1: 1105.0 mm

Metal roofing UNI 2: 1100.0 mm

Trapezoidal sheet roof TR 18A: 1100.0 mm

Trapezoidal sheet roof TR 35A: 1060.0 mm

Roof covering KJG FALZ: depending on the coil width

Roofing panel CLICK 205: 205.0 mm

Roofing panel CLICK 306: 306.0 mm

Roofing panel CLICK 515: 515.0 mm

The maximum manufacturable lengths of coverings are as follows:

Metal roofing UNI 1: 8400.0 mm

Metal roofing UNI 2: 8400.0 mm

Trapezoidal sheet roof TR 18A: 8000.0 mm

Trapezoidal sheet roof TR 35A: 8000.0 mm

Roof covering KJG FALZ: depending on the roof design

Roofing panel CLICK 205: 8000.0 mm

Roofing panel CLICK 306: 8000.0 mm

Roofing panel CLICK 515: 8000.0 mm

You can find all the minimum slopes of the roof coverings in the download section /technical and information aids.

We provide a profiling service directly at the site of the building unit. Our trained staff will bring the profiling equipment together with the necessary construction material, where it will then perform the profiling of the required profiles at site.

In this way, we can ensure efficiency and adapt to specific conditions of the construction.

The difference between the folded roof covering and the CLICK roof covering lies mainly in the method of installation and aesthetic properties:

Roof covering KJG FALZ (classic folded roofing) is a traditional type of sheet metal covering, where individual sheets are connected by the so-called double fold (bend). This method of installation requires experts, because folding is done by hand or using special machines. The folded roof covering is very resistant to weather conditions, also suitable for roofs with a very low slope, and it has a classic, elegant look.

Roof covering KJG CLICK system is a modern type of roof covering which is installed easier thanks to the so-called CLICK system. This system allows you to click individual sheets into each other without the need for manual folding. The installation is quicker and manageable even without special equipment. The roof covering CLICK has a clean and modern look, but it is not always as resistant to extreme conditions as classic folded roofing.

You can find all types of snow catchers in the section Products under the category Snow catchers. They are divided according to the type of roof covering, which will make it easier for you to choose the right catcher for the KJG roofing.

If you need advice on choosing, do not hesitate to contact us.

When installing KJG roof coverings, it is important to take into account temperature conditions, because low temperatures can affect the properties of materials and the quality of work.

In general, it is recommended to carry out the installation of sheet metal roofing at temperatures above +5 °C.

At lower temperatures, increased material fragility may occur, increasing the risk of damage during installation.

In addition, at temperatures below the freezing point, there may be problems with sealing and applying sealants that may not adhere or cure properly.

We offer standard flashing which we have in stock and also custom flashing which we can make exactly according to your requirements and technical specifications.