In our offer, we introduce a new generation of sleeves:
The basic sleeve is called Sleeve with tip and the tip length may be 150, 200 or 300 mm long. This sleeve is available in sizes 80, 100, 120 mm (depending on the lead-in pipe diameter).
Another type of sleeve is called Socket with nut M10. This product is becoming more and more popular with customers and tinsmith-roofers. The reason is the multifunctional screw M10 that can be mounted on a wide range of screws according to the mounting surface:
Dowel for downpipe bracket square pim 7x7
Use with the sleeve with tip Dowel R1 + protective cap. It is used to fastening to a non-insulated façade, wood or for an insulated facade with the tip length of 300 mm, the dowels serve to better fixing sleeve in the wall.
Dowel M10
Use for the sleeve with nut M10 Combiscrew M10 TORX + protective cap. It serves to fastening to the facade, wood; easy installation thanks to self-cutting tip.
Dowel with lamella M10
Use for the sleeve with nut M10 Selfcutting screw M10 TORX + protective tap Dowel with lamella. The dowel with collar serves to be fixed to the facade. For an insulated facade, we recommend a tip with length of 300 mm. It also serves to be fixed to the wood. Easy installation thanks to the self-tapping tip. The dowels serve to better securing the sleeve in the wall. The dowel with lamella is preferably used on the insulation wall.
Downpipe bracket mounting plate M10 + threaded rod M10
Use for the sleeve with nut M10. Threaded rod M10 + mounting plate. It serves to direct fixing into a sandwich panel, trapezoidal sheet-metal.
Insulation dowel M10
Use for the sleeve with nut M10. Dowel into insulation + protective cap. It serves to fixing on an insulation facade.
